Edit Setup Wizard: Station and Method

A common use for the edit setup wizard is to update station coordinates and/or the orientation.

1.	Check whether the setup method itself can be left as set in the field data or whether it needs to be changed.
2.	For orientation methods that use a known station point, check the source of your station point.
3.	Select the icon to select another Station Point Source from the flyout list and then OK to confirm your selection.
4.	Adapt the instrument height if necessary.
5.	Select Next to proceed with, Edit Setup Wizard: Setup Observations.

OK

Next

Orientation methods using known station points are:

Orientation methods using known station points are:

Set Orientation
Known/Multiple Backsights
Height Transfer

Stations to be calculated in a resection are always set up on unknown points. For resections the station ID can be changed but you cannot select a different station source. You can only choose to recalculate the resection by using different target points in the next wizard step.